Tile Doctor Burnishing Pads used to Polish a Healthy Shine onto Limestone Flooring in Brighouse Yorkshire

This limestone floor in the kitchen at a property in Brighouse was laid over five years ago and since then the sealer had worn off allowing dirt to become ingrained in the stone and grout lines. It now needed to be deep cleaned with attention to the grout lines and then sealed to protect it going forward.

I visited the property to survey the floor and work out a restoration plan that would renovate the stone back to its original condition. The work required was straight forward so it didn’t take long to work out a quotation for the renovation.

Happy with the quote we agreed a date for my return.

Cleaning a Limestone Tiled Kitchen

To deep clean and renovate the Limestone I used a set of 17-inch diamond burnishing pads which included 400, 800, 1500 and 3000 grits. Before I could get to work though the wooden kitchen units had to be protected from the cleaning solutions by applying a thin line of clean silicone sealant between the floor and the base boards. Doing this ensures water doesn’t soak into the wood where it can cause them to warp.

The Kitchen was quite small and the equipment proved to be a challenge to operate in such a confined space. I was using a weighted rotary floor buffer and triple motor wet vacuum, so extra care was needed.

I began the stone floor cleaning with the application of a 400-grit pad fitted to a rotary buffer and ran over each tile four to five times using water for lubrication. The soiling generated from this action was then extracted with a wet vacuum and I turned my attention to the grout lines.

To clean the grout, I used a strong dilution of Tile Doctor Pro-Clean which was left to soak into the grout for ten minutes before being scrubbed by hand along joint lines. This was then rinsed off and extracted as before. Switching back to the limestone floor the burnishing work continued with the 800 and 1500 grit pads, applied as before with water for lubrication and rinsing and extracting afterwards.

After the end of the first day the floor looked much cleaner, and it was left overnight to dry out.

Sealing a Limestone Tiled Kitchen

The next day I continued with the stone burnishing using the last pad in the set which is a very fine 3000-grit pad that adds a nice polish to the limestone. This pad is applied dry with only a small amount of water sprayed onto the tiles. This last pad leaves the floor dry and ready to be sealed.

The floor was then sealed with Tile Doctor Ultra-Seal which was chosen to keep the floor looking as close to its natural light colour as possible. Ultra-Seal is a virtually invisible sealer that soaks into the pores of the stone protecting it from within and works well on limestone.

The client was very happy with the result and the finish, and the new sealer would ensure dirt remains on the surface of the stone where it can easily be cleaned away with a product such as Tile Doctor Stone Soap. I always recommend this product for cleaning polished stone floors as its formula helps maintain the patina.

Source: Limestone Floor Polishing Solutions and Services in Brighouse North West Yorkshire