Removing Mould from Travertine Bathroom TIling in Telford with Tile Doctor Duo Clean

This Travertine tiled bathroom at a property in Telford had a bad mould problem and was in desperate need of renovation. Additionally, the tiles had been marked by water staining which was especially prevalent underneath the taps. The owner had decided it was high time to do something about it and I was asked to intervene.

Mould forms in damp warm spaces and can usually be avoided by increasing the ventilation in the room. Sometimes this is just a question of leaving a door or window open after showering, running the shower on cold after use can also help.

I arranged a visit to review the problems and recommended that the Travertine wall tile and grout be deep cleaned, removing the mould in the process, and then sealed to make cleaning easier going forward. The silicone sealant around the bathtub was also affected and we find the easiest way to deal with this is to replace it. I re-assured the homeowner that this wouldn’t be a problem and worked out a quote for the renovation which was accepted and a date set for my return.

Cleaning a Travertine Tiled Bathroom

My first task was to start the tile and grout cleaning with a focus on removing the mould. Tile Doctor have a double action cleaner and mould remover designed for this situation called Tile Doctor Duo Clean, so I started with that. It has a trigger spray so it’s just a question of spraying it onto the wall tiles and leaving it to soak in for ten minutes. The atomiser mixes the active solution with air making it lighter and allowing it to stick easily to the vertical surface. Dwell time is important as this gives the product time to start breaking down the dirt and mould. The tiles were then scrubbed and the soiling rinsed away.

The next task was to restore the appearance of the Travertine tiling which had suffered from water staining and was dull and needed polishing to bring it back to life. To do this I used a range of six-inch diamond burnishing pads which come in different grits from 400 to 3000-grit. The pads fit a hand-held buffer and are run over each tile in sequence using only water for lubrication and rinsing after each pad. Work starts with the coarse 400-grit which further cleans up the stone and then you move onto the 800, 1500 and 3000 grit pads which slowly restores a polish to the Travertine.

When all this was done, we removed the mouldy silicone from around the bathtub and let the tiles dry off overnight.

Sealing a Travertine Tiled Bathroom

On my return on the following day, I applied new silicone sealant and when it started to go off, I sealed the tile and grout with three coats of Tile Doctor Ultra-Seal. The sealer soaks into the pores preventing contaminates from becoming ingrained there and ensures water runs off the surface easily.

Last step was to replace the silicone sealant with a fresh anti-mould version in White and this finished off the transformation of the bathroom.

Once complete the mould and staining was gone leaving the bathroom looking like a new installation, as you imagine my client was really pleased with the result and much relieved.

For the aftercare of sealed shower tile and grout I like to recommend Tile Doctor Aqua-Pro, it’s a mild cleaner that is sprayed onto the tiles. It has an effective yet Ph neutral formula that won’t impact the sealer which can be the problem with many of the more aggressive cleaning products you find in supermarkets.

Source: Travertine Bathroom Restoration Products and Services in Telford Shropshire