Deep Cleaning Porcelain Tiles using Remove and Go Combined with Remove and Go in Birmingham

This Porcelain tiled floor was laid in the kitchen of a property in Edgbaston around eight years ago. The customer contacted me regarding how dirty the tile and grout had become since being installed despite them being regularly cleaned. Happy to help I agreed to call in, survey the floor and give them a quote for deep cleaning and returning it to its original condition.

Whilst at the property I could see the Porcelain tiles had a coarse textured surface which has the advantage of being less slippery than a smooth tile however over the years it had been trapping dirt and making them difficult to clean.

I ran a cleaning test on an inconspicuous area to understand the most effective way of cleaning the tile and grout. The test went well, and it quickly showed the difference between a clean and dirty tile, it also gave me a good idea of what it would cost to renovate the floor and provide an accurate quote. The customer who had been cleaning the floor for the last eight years was impressed with the difference and happily accepted my quote.

Cleaning Textured Porcelain Hallway and Kitchen Floor Tiles

The cleaning process began by spraying a combination of Tile Doctor Pro-Clean combined with Remove & Go onto the floor, these are both alkaline cleaners although Remove and Go is designed to remove sealers and other coatings. I left it to soak in for ten minutes before starting to work it in with a rotary buffer fitted with a black scrubbing pad.

As I progressed, I noticed there were some stubborn marks on the tiles which were being left behind so I switched the Black pad out for a 240-grit silicon carbide brush. This may sound harsh for use on Porcelain, but I have used it many times before on textured porcelain with no problems only good results.

After cleaning the main area of the kitchen and utility I turned my attention to the floor edges and corners which I did by hand. I then spent time cleaning the grout with more Pro-Clean scrubbed in with a stiff brush.

Once finished the floor was rinsed the floor with an Airflex Pro machine which applies hot water under pressure whilst simultaneously extracting it to a tank on the machine. This is an expensive piece of kit very popular with carpet cleaners but equally as useful on hard floors, it leaves the floor looking very clean and saves a lot of time compared to rinsing and vacuuming.

The last step was to set up some air movers to help dry the tiles and grout. The floor was looking much improved already and I hadn’t finished.

Sealing a Porcelain Tiled Floor

Most Porcelain tiles won’t take a sealer however these were the micro porous variety and I was confident they would take a seal. So once the floor was dry I applied two coats of Tile Doctor Ultra-Seal which will help to make it easier to clean and protect the grout.

On completion the Porcelain tile and Grout looked so much cleaner and my client was relieved that I had managed to get all the ingrained dirt out of the floor. Before leaving I took time to discuss aftercare and left the customer with a bottle of pH Neutral Tile Cleaner that will help maintain the appearance of the floor in the future.

Source: Porcelain Cleaning, Renovation and Sealing Products and Services in Birmingham